Welcome to the Corvette Forums at the Corvette Action Center!

What brand of paint stipper for stripping vette

Billm10454

New member
Joined
Jun 9, 2007
Messages
2
Location
Boston, MA
Corvette
1973 Yellow
What brand of paint stripper is good for stripping my corvette. Also any help would be appreciated on what I need tp paint it, like the size of air compressor to use and type of spray gun etc. Thanks
 
:w Bill Welcome to the Corvette Action Center Community ;)

If you get a chance please take a few minutes and visit ourNew Members Introduction Forum and say :w to everyone ;)

I did a search using "Stripper" as the seach word and here are a couple threads that might interest you ;)

Media Blast verses Chemical Strip

and

Best Paint Removal Process

Both of these discuss Paint Removal with recommendations/suggestions of which Chemical they used. Very knowlegable folks weighed in with their opinions too ;)

Good Luck with your upcoming project ;)

Bud
 
I have always used Zip Strip from the local hardware store. It's water soluable so you can hose it off and nutralize it with water.
 
Cap'n Lee's fiberglass stripper. 2 gallons to strip at least 4 coats of color and two coats of clear. Worked perfectly. Spray it on and the paint curls up and falls off. Neutralized with water and will not harm the fiberglass.

strippedresize.jpg
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom