Recent content by ddahlgren

Valve layout? Did they swap sides for valves? In the pics here for the engine specs the intake valves go from right to left on one and from left to right on the other..

What is crazy is you can get a 4 valve econobox or pickup truck...sigh.. at the end of the day the bean counters still win at gm and something to learn to live with. No matter what cool design is done if there is 200 bucks per unit to be saved and cut the soul out of the car they will bite and...

Possibly turn it into a Fiero.... Low buck V6 econobox with flip up headlights...

V8 On top of building a V8 even a V12 would be fine with me it is inhernetly in balance and sounds way over the top. The LS platform is very good but making the best tractor engine is interesting but.. I think they need to step up and build a real 4 cam 4 valve per cylinder one and make it mid...

C4 parts all new unless otherwise noted New DRM Camber brackets 100.00 + shipping DRM Trailing arm brackets 100.00 + shipping VBP 32 mm front sway bar with poly bushings 125.00 + shipping VBP 26 mm rear sway bar with poly bushings 125.00 + shipping HD Camber rods with 3/4 heim joints and...

Hi Pete we have chatted on another board and I started a thread there about Dexron VI vs. Dexron III that lead me here. My gut feeling is that with Dexron III a 700r4 has easily gone 150k miles with proper care so how bad can it be. My second thought was with a stock trans it was probably...

http://www.summitracing.com/parts/HOK-2151HKR/ They are brand new never used. With new reducers and gaskets for them. There is nothing wrong with them just too much header for the direction I am going right now. I think the reducers are to 2 1/2 as I bought them for my 91 but can measure them...

The dealer told me on my 91 that was withing the VIN number range that if the belt is not sticking there is nothing to do as not every one is defective..

I did a tuneup on my 91 several months ago and the new AC delco wires were 16,000 ohms. I have no idea what they were thinging 3 times more resistance than the OEM ones. Put on a set of moroso 8mm spiral core wires and all was well again! don't get wires with less than 700 ohms per foot like...

Notice this in the listing.. Tokidoki Fantasy.. nuff said... for less than stock headlights..

Over the years i have found most things done to make a car look cool usually make it handle worse. The race car look everyone likes also has revised suspension pickup points uprights etc. they are very differnt animals wearing the same body panels. I work on sporty type race cars every day...

Looking for ecm complete with memcal 1991 L98 coupe. Dave

It is prettry easy to pull the codes as to what sensor is bad.. I have three of a 91 which is the early system that are good or at least do not throw a code. The left front is dead the rest fine. I would love to sell either 1 or all of them for anything that borders on realistic.. Dave

I might try that but the code came up every time i drove the car and the sensor looks perfect like the others that do not throw codes.. Possibly whatever does the transmit to the controler is broken or the recieve on the controller for left front not working. I am not interested in completeling...

I have the following off a 91 L98 Coupe All housing are Black with colored plasic insert with part # etc.. GM parts book says they are 89 to 92 All the OK's are no codes at all the green LF thows a code every time... All removed by dealer with warning they are there and they were well...