Search results

700R4pressure You got me worried :confused so I checked the service manual which said that the transmission develops pressures up to 200PSI!! However, I called a local trans shop who wasn't at all concerned with my hose repair. He said that the cooler loop pressure is only 17 psi. If he had...

Cuisinarts My 89 was the first year for the 17 inch Cuisinarts. I beleive previous models with Z51 and 17 inch wheels had a similar wheel with six openings instead of 12. I think if you look in the info part of this forum, once they get the home page back up you can see pictures of all the...

Craig. Wish I could help but I'm just not knowledgable in this area. Might I suggest you take a few days off from the problem and clear your mind a little. When you do get it figured out, and you will!, take a road trip out here to Colorado and I'll give you a hug and buy you a beer.

Thanks for the info. The problem is solved. I had in fact broken loose the fitting. The problem was the tube is welded to the inside of the fitting. I had no choice but to sacrifice the tube to get the fitting out. I have since tried driving the tube out with a punch and drilling it out...

I cleaned out the space between the radiator and A/C condeser this weekend. Leaves, pine needles, cigaratte butts, paper etc. Relatively easy job. Only problem was that the bottom auto trans connection was frozen. I was extremely careful with it because I intended to drive the car to Phoenix...

Witchhunter's Excellent Service Just wanted to plug our CAC member's service. Sent him four injectors from the MR2 I run for the kids on Monday. Individually packaged and numbered. Received them back on the following Saturday. Indivudually packaged and numbered. Included test report and...

Excellent Service Just used Witchhunter to clean up a set of four injectors for the kids' MR2. Excellent Job! Sent them off Monday individually wrapped and numbered. Received them back Friday still individually packaged and numered along with flow test results before and after and...

Edmond. I bought and have read Lingenfelter's book on modifying the small block Chevy. It was refernced here on the forum. I thought you said you had a copy. There is an excellent discussion on the TBI in the book. Basically, short,fat runners make good top end HP and limit low end torque...

Encouraging I have looked closely at that bottom hose myself and didn't think it could be done without removing all kinds of stuff. After reading what you guys posted, I am going to give this a try myself. Thanks. I will try to keep the cussin' to a minimum while I try to fit that !%#^%!#% hose...

Ridin' the bus to work more with the upper crust of Denver:eyerole so I can drive the Vette on the weekends. Still planning a road trip to Arizona in October!:upthumbs :crazy

Saweeeet! Very RED! Some say they all are!

Congrats on the new chariot! Get used to the permagrin. It will be chronic condition!

Welcome to the CAC my new Vettebrother! Like the guys above said plenty of friendly expertise here.

Congrats Stearnman. Mine had a few little things to be corrected as well. Still isn't a show car but I bought it to drive. After ten years of wrenching on my 70 Malibu Convertible, I wanted something I could just pull into and out of the garage and drive. The headlight fix is pretty easy...

Do a search. There have been numreous discussions on this subject. Some folks swear by the stuff.

This is a simple job and the article referenced by Stu is helpful. SO, why haven't I done the driver's side too?

John's right. This is exactly what I thought when I read your last post. Except - Did the dealer troubleshoot or did they just do what you told them to?

Man, have you opened Pandora's Box! Guess I'll get it started. In stock condition, I don't think an 82 can hold a candle to a 92 in terms of performance, handling,fuel efficiency. Looks/styling are a little more subjective. I am a C4 owner and love the styling but sounds like you prefer the C3.

According to C4C5 Specialist at the Cruisefest Tech session - Fuel filters do indeed become waterlogged.

A 50 footer? So the bubbles make it a 50 footer? $14K for a 50 footer? So much money and effort for a 50 footer? I think I would storm the body shop like it was Iwo Jima!