Search results

Nice pix. Thank you. Chuck

Cell phone and your AAA card. :) Seriously, I've driven our 69 on several LONG trips, Baltimore to Bowling Green, Baltimore to Montauk, LI, NY, and Baltimore to St. Louis, MO. NO problems. Don't worry...have fun. Chuck

:D Define "reasonable" ? Whatcha looking for? What condition? Project car? "Done" car? Original motor/NCRS/BG type of car? Nice driver? AND, most importantly, what price range are you looking for. You can't touch a driving midyear in my area for under 25K. Chuck

I believe the only identifying item on the generator is the Delco Remy tag, with the PN and date. I don't believe there are any stampings in/on the case. You could get any generator of the correct configuration and get a dead on repro tag for it. Chuck

Post a pic of the stamp on the block. Chuck

Pat and I will be there, Rick. Chuck

There's ONE on EBAY now. Original 63, left side, I believe. NOS in the box. Chuck

Dare I say "Pro Team"? I see you're from Toledo. They're right in your back yard. LOTS of cars for sale. Never bought from them. Know all the stories. I've been around a LONG time. :) Chuck

And, regardless of what anyone says, you have to take out the trans to put it in. :) Don't ask me how I know this. Chuck

Excellent. Expensive. Chuck

Behind the crank....on the outside of the door panel. Has 3 prongs which poke through the panel and are crimped over behind the panel. There is a rubber donut like gasket that goes under the door panel. Chuck

The oil gauge is a purely mechanical gauge, no electrics at all. Only way it wouldn't work is if the line was plugged, or the gauge itself was plugged up. Chuck

Can you let the manifold down, and remove it from underneath the car? Chuck

:) The price you're quoting IS for the jig assembled front end. Here's a cut and paste from the ad. The one piece fronts are $1350. You don't want that one. Why? Usually poor fit. It's a cheesy cheap repair that you'll regret. When the day comes to sell the car, it will significantly reduce...

It's Jim Sermersheim. He's in Indiana, as I recall. Don't have his #. I don't believe you want the one piece front. I think you're asking about the jig assembled fronts, which both Image and Sermersheim make. Chuck

The letter I and the number 1 are used interchangeably. That adds to the confusion. Also, the letter O and the number 0. More confusing. :) Chuck

Run, Forrest, RUN. :) Absolute total 100% bogus scam. Chuck

I'll be there. My neighbor, Dennis, and I already have his pickup packed. We're leaving at about 5 AM Thursday morning. Should be there at 6:30AM. We're setting up in I 27 to I 30. Stop by if you get a chance. Chuck

My page shows $324.00 for the pair. Expensive? Dunno. :) Figure the cost to repair the pits and then re-chrome the pot metal on the originals, plus painting, etc. Cost of new correct repro vs. refurbish the old ones. :) Chuck

Here's what you're lookin' for. :) Chuck http://www.corvette-paragon.com/catalog/Product.aspx?id=147F2FE8-303C-450E-8383-CAF2773ED8CA