Search results

Last year when I went to bloomington, it was in the upper 90's, and there was plenty of slow going moments, kinda like a parade. Clutch in, clutch out. On and on. My car never ran as hot as it did down there. Got a weird noise also. Also plenty of clutch chatter getting into first gear. Never...

I have a pair of headlight bezels, $50.00,and a right side radio side panel, $50.00 All in good condition.

Does anyone make a 64 coupe in any scale? Can't seem to find one. Any help would be great!

Have you tried some PB Blaster, or some other type of aerosol penetrating oil, with a soft rag?

Apparently the Keisler trannys are longer than a muncie. My yoke, muncie, is straight up from pivot bolt, while yours is inches further rearward which is why it's so close to cable. Thats what I concluded anyway.

How can you fine tune the push without effecting pedal travel? I have the same linkage and any adjustment on either rod end will move pedal somewhat, Right? It does on mine. I think that titanium paint looks great!

Need a spare tire tub for 64 coupe.

Glad I could help. After about an hour of searching I remembered who had the stuff. Hope it works!:upthumbs

Try millertire.com They have exactly what you are looking for.:upthumbs

I've had good results with JBWeld on my halo and rear glass trim screws. It is possible to ram some in the hole far enough to give it some bite, then I applied it over the hole approx one inch wide, kinda thick, so as not to interfere with trim, then redrill new hole.

Can the body mount cushions be replaced with body on car, and if so, how? 64 coupe.

Those symptoms will appear with a bad ground connection. That I know, but maybe it's a ignition switch problem. I would check for good ground connections first.

www.tractionmaster.com:_rock

Found it! :cool

Thanks John, gotta getum! :) Think they have a website, or would you have any contact info?

Anyone ever install any type of traction bars on their C1"s. Buddy of mine has some annoying wheel hop that needs to be corrected.

Just told the wife to pack, we're moving south. I left, she stayed.:confused just kidding!

Is it just me,or what. I gets harder and harder every year to put car away for winter. But almost did today,53deg. today here, near Milwaukee. But 38deg and a little higher next week. They're will be some drivable days yet. I hope. What about everybody else. Pretty hard to do, isn't it?

:cool !!!!

Mid America has metal supports, for 63-64 door panel, PN. 601-650. Now were these originally used on these years? My 64 doesn't have them, and I got a pair of these a while ago, and they didn't seem to really fit right, so after a few attempts to make them work,I decided to return them, thinking...