Search results

My 87 with a digital dash only has half brightness on the right side. The right half with the tac, oil pressure, and fuel use is quite dim, the left half is fine, I'd say the right side is about half the brightness of the left side. I had not run the car for several months this winter and put a...

I tried that and it still spun. Looks like I'll either have to drill it out or tear the housing apart to remove it. I have to replace it anyway. I just don't want to break something else while removing this piece.

Does anyone know if there is a "trick" to removing the air intake duct on an "87". There are two knobs on top of the duct. I assumed I could just unscrew these two knobs and the duct would come off. The Bad news is the knobs just spin. I thought about breaking the duct off but that would be a...

Thats the part. From what I'm finding out I'm going to have to take the door panel off and drill out some pop rivets, attach the part with new pop rivets then put the door panel back on.

It's the second part. The thicker piece that you would rest your arm on. Part of the drivers side one lifts up and it looks like there is a pin that goes into the door metal that is broken off??????? I have a chiltons but it doesn't mention this part. I found the part in a Zip Products catalog...

I'm the new owner of my first Corvette, an 87. The engine is dirty, mostly dirt - dust. Is it recomended to steam clean the engine at a reliable shop or can this cause other problems????????????

Door Trim The part I'm looking at replacing isn't the rubber piece that rubs on the widow as the window goes up and down but the piece between that and the door panel. The part you would rest your arm on while driving if you had your elbow sticking out the window. It's a plastic piece covered...

How do you remove and install new inside upper door trim on a 87 convertible. It looks like it has to be pryed up to force it off. Then does the new trim get pressed back on? Im new at this and don't want to screw it up.