Welcome to the Corvette Forums at the Corvette Action Center!

Body Side Moldings

J

J.T. Marlin

Guest
How are the body side moldings attached to the side of the Corvettes?
 
C5s are the only ones with body side moldings? Right? Well, if a specific year: 2001.
 
I thought maybe you were referring to the belt line moulding on the C4s. I mean,
...side moldings attached to the side of the Corvettes.
isn't very specific. ;)

Sorry, I can't help ya. :(

Ken
 
Mouldings

J. T.,
I haven't looked at them real close but they have to be attached with an adhesive. Probably a 2 sided moulding tape. They just don't drill holes in doors like they used to.

Tom
 
The body side moldings were an option on all C5s. To double check, take a look at the C5 Specification pages here at that CAC. As for how they're attached, although I can't verify it, I'd venture to agree with Tom.
 
:J Yes,
There is a way to remove the BSMs.
1. Monofilament or dental floss
2. WD 40
3. Start at one end of the BSMs and spray some WD40 on the edge of the BSMs and gradually work the monofilament or dental floss on the adhesive side of the BSMs and they will gradually come off. Take your time!!!!!!!!!!!
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom