Corner sagging

[VetNutJim]

The chassis works like a big X.

To affect the height of a specified end/corner, go to the opposite end and the oposite corner.

IOW: To raise the right rear, lower the left front.

A SMALL adjustment done in this fashion will make a fairly large adjustment on the desired end/corner.

BTW, my 91 is adjusted level but the spring bolts/nuts positions are not close to even.

 

[JT ZR-Won]

BTW, my 91 is adjusted level but the spring bolts/nuts positions are not close to even.

Same with mine

Jay