Welcome to the Corvette Forums at the Corvette Action Center!

Distributor not working with Tach

manofsteel

Active member
Joined
May 30, 2009
Messages
41
Location
Delaware
Just bought a 1973 coupe that has a non working tach. Upon checking out the distributor, I find that it does not have a mechanical way of turning the cable for the tach. So what shoud I do in order to have the tach working. Any help will be appreciated. Thanks ;shrug
 
You have two choices:
1:Get the correct tach drive distributor for your car(sounds like someone removed yours and put in a regular dist.
2:Change your tachometer with one from a 75 that dosen't use a tach drive cable.
 
:welcome

If you go w/ option 2, be sure your distributor can send the correct signal for the '75+ electronic tach.
 
After thnking about the two aforementioned choices you will probably conclude that the easiest (time wise and aggrivation wise) and the least expensive will be to change the distributor, and you would be correct.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom