Exterior Transformation almost complete

[SPANISHVETTS]

my LT1 intake

That should take you out to 6000RPMs and well over 500FWHP. I went too Ape-**** on Torque when we built Thunder*. With the 3.08 rear end I can light up slicks and keep them spinning through 3rd gear. Do not get me wrong…I still love the low end grunt but there is just so much of it you can get to the ground.
*After 30 years of fooling around with SBC it is still hard to believe the torque that you can get out of a stroked small block. I have learned a lot from your threads…Keep the good stuff coming.:BOW

The black wheels look great. I just powder coated my saw blades. One day I will get a pic posted.

 

[rrubel]

Just as an FYI, the wheels are currently sold to Vettefan87, pending receipt of money order (he asked about them last week).

Mic, I need those other two center caps soon.
[RICHR]

 

[Mad-Mic]

Just as an FYI, the wheels are currently sold to Vettefan87, pending receipt of money order (he asked about them last week).

Mic, I need those other two center caps soon.
[RICHR]

Rich,

the center caps are in the box.

 

[Mad-Mic]

thank you sir! I dropped him an email

damn nice wheels (and damn bald tires, I thought I was bad :L)


What size spacers did you use for your 88-90 wheels?

i used none on mine but i don't like how close the tires are to the wheel well. could use a 1/2" spacer on the rears though. front's never rubbed on 275's

 

[Mad-Mic]

That should take you out to 6000RPMs and well over 500FWHP. I went too Ape-**** on Torque when we built Thunder*. With the 3.08 rear end I can light up slicks and keep them spinning through 3rd gear. Do not get me wrong…I still love the low end grunt but there is just so much of it you can get to the ground.
*After 30 years of fooling around with SBC it is still hard to believe the torque that you can get out of a stroked small block. I have learned a lot from your threads…Keep the good stuff coming.:BOW

The black wheels look great. I just powder coated my saw blades. One day I will get a pic posted.

i'm hoping 6800 rpm 400 rwhp and 400 rwtq with a good set of heads. i'm hoping in the 420 range and i'll be very happy! a 75 shot should push me at 500 rwhp and 600 rwtq :BOW