Hurst shifter-Back up light switch. Help

[69MyWay]

Does anybody know how the back up light switch gets put back in, or hooked up on the Muncie four speed with the Hurst shifter conversion?

 

[vigman]

If memory serves ( On my 73 )

There is are two wires that goes to the REV switch
Pink & Light green

Pink= Ign power
Lt green= run to rev lights on a 2 pin connector.

This is a single connector thru the firewall and down to the tranny ( Pass side ).

There is a flange which mounts to the Transmission side cover plate. The flange mounts the switch and the switch gets actuated from a piece of wire ( read carb linkage bent wire ) going to the reverse lever on the tranny.

So it shouldn't matter what linkage you have, the connection is from the tranny to the mounted switch.


Mike