Welcome to the Corvette Forums at the Corvette Action Center!

My custom Big632 billet gas cap

norvalwilhelm

Well-known member
Joined
Apr 20, 2004
Messages
396
Location
Waterloo, ontario
Corvette
75 blown bigblock
A special thank you to Mike for the beautiful cusom gas cap....

My custom gas cap arrived about a ½ hour ago. It is a custom Big 632 billet stainless cap. The quality is excellent, the finish, the 8 button head screws and the engraving on the back. Beautiful custom piece.

I ran out to the shop, pulled the 4 screws that hold the chrome ring on and took it to the bench, removed the old cap and replaced it with the solid stainless cap held on with 4 10 x 24 cap screws.

Heading out to the shop I thought about the weight of the replacement billet cap but after removing the stock one relized it is heavy too. Can’t drill holes in this thing???

Anyway it fit the trim ring perfectly, holes all lined up and once tighten fit the ring perfectly.

Reinstalled the 4 screws and that was it. Took about 5 minutes but now I have a piece of Big632.

Nice job Mike, the engraving on the back makes it a original. It is getting hard to find a non custom part on the car.

Thanks again Mike for providing me with yet another custom piece to set my car apart from the run of the mill cars.

Before

4q31gp


After.

4q31jc
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom