G Winter
Well-known member
I don't know how long you have run the engine since the initial rebuild but I would think an oil flow restriction would very quickly manifest itself in a bearing failure.
Have you checked the oil pressure at the front of the engine?
that would tell you a little on restriction.If you really do have a problem with valve cover leak, are you cleaning all the oil from the surfaces? Seems like oil between a sealing surface creates a path.
Glenn
Have you checked the oil pressure at the front of the engine?
that would tell you a little on restriction.If you really do have a problem with valve cover leak, are you cleaning all the oil from the surfaces? Seems like oil between a sealing surface creates a path.
Glenn