Welcome to the Corvette Forums at the Corvette Action Center!

U joint change

W

Willycool

Guest
Hello everyone!

I just changed the u joints on my 89 C-4.......made a big difference in performance . But what a job!

I would get a strange shutter at 90mph and the odd clunking noise when i put it into gear.

What was happening was that the left shaft was very loose (bad u joints) and it was causing the car to shutter as it truned.

I suggest that you use the DANA u joints for a replacement.(sealed unit)

The greaseable u joints tend to collect grit, which will cause damage to the unit. (non sealed)


Good Luck!
 
Thanks, Willycool!

Need to change the u-joint on the upper left outdrive? shaft

soon and I appreciate the encouragement!
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom