350 that I just took out of my 62 is now for sale. 350, "010 block", 4 bolt mains, 30 over, big valve heads, 9.5:1 compression, L46 cam(350/350), PCV set up like 1969 L46,Mellings oil pump, Flo Kooler water pump, Edelbrock aluminum manifold, 1850 list Holley 600 CFM, Mallory tach drive...
Getting ready to swap out the'73 350 in my 62 and install the rebuilt, correct 1962 340 HP 327. Have the correct "901" and "902" exhaust manifolds.
Right now the 350 has Hooker headers with flange and front pipe of exhaust system has been modified with matching flange, so I will need to replace...
Trying to help out a buddy with an 80 who wants to get rid of "bubble" lenses installed by previous owner. The "usual suspects" (Corvette Central, Ecklers etc) do not seem to repro these lenses which seems a bit strange. Going to be at Carlise anyway so thought I would check for NOS, repro, or...
Right wing nutcase?
If it were not for PRESIDENT OBAMA and his administration's bailout of GM THERE WOULD BE NO CORVETTE being buiilt TODAY becasue there would be NO GM. You show both a lack of respect for the President and your IGNORANCE with your posting. GM has paid back the bailout money...
1982 low miles(47K) Black over Silver Green recently acquired.....OEM radio not working, everything else is!! Any tips on removing the radio for repair to avoid breaking anything?? As I recall the center console bezels are very fragile....Must it be removed to R&R the radio or can you snake the...
P3510 " Advance Auto Parts" remanufactured starter.
Looks like you started with a non GM starter anyway. That number is Advance Auto Parts number for a rebuilt GM starter. Currently sells for about $45 and applications range from Chevy Astro Vans to Buicks and Chevy-GMC trucks in the 1990s...
Glassworks vs. Auto Entec
There is no love lost between the father (Auto Entec) and son(Glassworks) after a business split up some years ago.
The Corvette restoration shop that painted my car and installed a new top prefers Glassworks.
62 Roman Red 2 Tops
Rebuilt Rochester Q Jet Available @ Summit Racing
You might want to look into Summit Racing part #64-7637 which is a rebuilt Q jet for your car if you can't find a rebuilder for yours. In this case Holley is rebuilding a GM (Rochester) carb which will have the correct bore spacing for your OEM...
Corvette Central 1962 windshield prices
Just looked at Corvette Central.(Corvette Central | Corvette Parts and Accessories including Exhaust and Performance.) In general their repro parts are better than most. They get $2795 for a complete repro windshield and frame.(Undated Glass) In your case...
Starter part number and date code will tell you the application it was for
NAPA or other FLAPS have cross references to the part number on the existing starter. Nobody will be looking thru a lot of boxes. There are maybe 2 or 3 starters for late model 350 small blocks. The newer the engine the...
Starter- PS
I have a perfectly good 1974(?) Chevy small block starter down in my basement spare parts box...took it out of my 1969 Top Flight 350/350 Corvette Coupe when I restored it.
It is the "later style" (Mounts to block and not to the bellhousing as early Chevy V8s did) and won't fit my...
Starter...Do you have the old one?
If you have the old starter it will have a number on it. If you aren't doing a judged restoration take the old one down to your local NAPA and exchange it for a rebuilt....no brainer.
What is included in the $2200 price tag??
My interpretation of the original post was that the Hardtop Shop would completely restore the windshield and all hardware including:
New correctly dated glass, buffing all stainless, repair and rechrome end posts, new gaskets, re-assemble and...
You are not alone...AFR appears elsewhere
Check this link at Chevy High Performance....another AFR small block question and reply.
Engine ID numbers not on charts - Chevy Forums at Chevy High Performance Magazine
Casting #?
The second picture of the casting # is pretty clear. There seems to be a gap in it where a digit could be missing.
That said, where on the block casting are you seeing this number??
In my experience, small block Chevy casting #s appear at the rear of the block on one of the top...
You might try this site for engine codes.
Chevy Engine Codes
There are small block suffixes starting with A and 3 characters long.
Check the section for small blocks labeled "3N-CDR"...Also check what you are seeing on the block. you may be mis-reading a character. Cannot see clearly on...
Auto Entec
There is also Auto Entec.....interesting part is Auto Entec is the father of the principal in the The Hard Top Shop and they are only a few miles apart in the Pittsburgh, PA area.
However....I do not believe you will find Auto Entec any cheaper.
You will find, if you research...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.