I would like to install a switch that would control my antenna. "Off" would keep the antenna down, and "on" would be normal operation. Which wire does the switch go in? Where's the best place to get to it?
Thanks,
Ken
Thanks,
Ken
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That did it! The people of CAC come through again!93 Polo said:Got a chance to go home for lunch, so here is what the instructions say.
1.Open the right rear storage compartment lid and remove the plastic tray and carpet liner.
2.Locate the Bose amp relay attached to the wire harness. (Should be on the bottom side.)
3.There will be two pink wires in 1993 cars (or dark green wires in 1994-96). One wire comes from the receiver box and goes to the antenna. Measure back about two inches from the relay and cut the pink wire in 1993 cars (or dark green wire in 1994-96) that goes to the antenna.
Hope this helps.