Hi all,
I need to remove the body side molding from the door of my wife's 84 to repair a crack in the fiberglass. Anyone here ever done this?
I only see two nuts. One at the front and one at the back. Obviously there are additional attachment points holding it in place. If there are...
The rear y pipe on my wife's 84 finally gave out. Time to replace and upgrade the exhaust. Just thought I'd ask your options on what I'm planning to do.
We've only had this one a couple of years. It still has original 84 factory exhaust with the turned down tips well short of the rear...
I started the following thread in the C4 Tech form looking for help. i'm adding a link to it here to see if any of the CF folks can help.
Help! No start problem on 84
The other day My 84 suddenly decided it didn't want to start after running just fine earlier in the day. Now it cranks but won't start.
By watching in injectors during cranking no know I'm getting no fuel. I also do not hear the fuel pump running at key on.
I checked the fuel pump fuse...
I need to get the wiper arms of my 82 out of the way for windshield removal/replacement. I don't see a retainer or set screw so I'm guessing they are press fit, but how do I get them off? Anyone have suggestions?
;help
Has anyone else bought a replacement dash for their 78-82? I got one through Corvette Central, but I'm so disappointed with the quality of this thing that it's going to have to go back. The plastic used to form the structure is really thin, its doesn't have much meet in any of the screw...
Anyone got a good 82 tachometer or a broken one with a good face I could scavenge? I've got a few small surface rust blemishes on mine. I'd like to replace it when I tear into the dash in a few weeks.
I was going through the cooling system in the 82 last weekend and found quite a bit of corrosion in the metal water line that is used to route the heater hose from near the water pump around to the back side of the AC compressor bracket. I've been looking for a replacement. So far I've checked...
Calling all Mid-America FunFest 2006 attendees.
I have made arrangements for CAC club parking at FunFest 2006. I will be sending Mid-America an approximate count this week so that they can allocate space for us. If you plan to attend this event and would like to park with all your CAC...
Calling all Mid-America FunFest 2006 attendees.
I have made arrangements for CAC club parking at FunFest 2006. I will be sending Mid-America an approximate count this week so that they can allocate space for us. If you plan to attend this event and would like to park with all your CAC...
Does anyone have an old rebuildable Q-jet carburetor laying around the garage that they can let go of cheep? Something around 1980ish vintage preferred. I'm looking for one that I can use to experiment with some internal modifications that should improve throttle response. If anyone can hook...
Due to changes in fanatical situation I've decided that it would be best to sell my beloved 2004 convertible. :cry This is a very classy looking car with silver exterior, black top, black interior, and magnesium wheels. Preferred equipment group (HUD and power everything). Auto trans...
;help On the 1980 how is the center front of the urethane (not the rubber) front spoiler supposed to be connected to the metal support which hangs down below the bumper?
At the moment the front of my spoiler is hanging lose. It appears to me to be missing some type of unusual fastener. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.