Search results

I don't anything about them...just that gmjunkie got one. I have seen them before on ebay.

There ya go. Junkies got one....money talks !!!

Go to the Corvette Forum and check out the recent post titled "sick of your dim gauges?"

Aw man...sorry about not following through with that thread. Last winter I completely rebuilt my brake system including the calipers and parking brake(ugh) and also pulled and inspected the intake along with rebuilding the Quad,,,,but...when it comes to the turn signals, I just assumed the...

Welcome to the world of our beloved American Yugo.....in disguise of coarse..:eyerole

Maybe someone can help me with this....My turn signals quit working suddenly for no aparent reason. I checked the fuse box for anything blown and all was well there but installed all new 'glow' fuses while I was there. Everything else works including the hazard flashers. Could this problem be...

Looking for a 78/79 Q-jet for automatic with A/C & Cruise linkage prefered.

Finally finishing up engine resto over the winter and getting ready to install the oil pan. As I now see it, I might have trouble with the end seals moving around during installation. I read to put a small amount of adhesive on the seals so they will stay in place but I wish to use a small...

Thanks abunch guys.... I've never "dropped" the pan before and surely appreciate the info.:upthumbs

Need to remove oil pan on my 78 Automatic...clean, repaint and install new gaskets. Looks like i'm gonna have to remove the P.S. cylinder and related rods to get it out. I removed the trans underpan and dropped the rear of oil pan down but only so far,, the front half hit the top of the steering...

WTB....1978 t-top hold down straps and hardware for rear compartment (dk.blue) and also a power antenna body bezel.;help

Thanks for the interest but I have found what I needed.

Wanted...Nice original 1978 L82 oil pan.;help Thanks ...Rich

:eyeroleAlso, go to the tech section and try to find a article by John Hinckley titled "timing And Vacuum Advance 101.:cool

This manual is near perfect with no curled, smudges, or dog-eared pages. The book is a 96 to 98 percent-er. All pages/cards are intact and clean with no writings. I paid 32 dollars for it, that's what i'm asking plus (actual) postage of about two dollars. It will be wrapped in foam between...

All connections are tight Sixfooter. I'm going to put a voltmeter on the battery as Steve suggests and see what that brings up. This is an O'reilly Auto Parts alternator with two years on it, about one thousand miles. I've heard these alternators aren't very good. Anybody know of a very...

Good question.... Should vette79 and I be worried ? I admit that I don't know much about auto electrical systems but this seems to be a danger when the needle sits in the red zone and will move downward only a little when I turn on lights and radio.

Cruising down the road today and thought I heard a strange whine coming from the engine bay, glanced at the gauges and the amp needle was pegged into the red +. I turned on the radio and headlights and the needle came down some but still reading high. Got it home and into the garage, turned off...

Some other members and myself were talking on another thread about oil and other contaminents bleeding through the fiberglass from the underside of the hood causing bubbles in the top paint. I thought it to be a very important subject and started this new thread. Members Phill and Koop has...

I'm starting a new thread on this important subject. See ""Bleed Thru""