C
C3RVETTE
Guest
Guess I better check it out,but I see it says crossfire in the link.Dont got none a those...
Rear end noise - bearings perhaps?
- Thread starter chevyaddict
- Start date
wishuwerehere82
Well-known member
- Joined
- Sep 6, 2003
- Messages
- 2,316
- Location
- Rochester, NY
- Corvette
- Red '82 Coupe,Sebring Silver '98 Coupe
Dawn,
You're welcome.
I hate seeing an intelligent, attractive Corvette owner benched with emmision problems. Have fun before going back to school.
Pete.
You're welcome.
I hate seeing an intelligent, attractive Corvette owner benched with emmision problems. Have fun before going back to school.
Pete.
C
C3RVETTE
Guest
So,Dawn,did you find the problem? I'm curious because after I recover from all my latest engine & suspension mods,I'm going to look a little harder to find my clunk. Man,what a difference a couple weeks makes in the weather around here.We went from dry 80's-90's to wet 60's already!
- Thread starter
- #64
chevyaddict
Well-known member
No, school has started and I am just swamped! Plus I got this big job with my business that is just keeping me too busy..... Wish WE were in the 60's - heck I think the high today was 102!!C3RVETTE said:
C
C3RVETTE
Guest
Well,at least you are busy! Things are pretty quiet around here rite now. You live in AZ,so I guess I should expect warm weather there,but 102*!:eek Whats the big job,if I can be so nosy? Or do I have to reactivate my Top Secret Clearance?chevyaddict said:
- Thread starter
- #66
chevyaddict
Well-known member
Well, I am invested in this new startup company to which I am also managing all the financials for them (accting, bookkeeping, income, payroll, etc.) It is just 'bout ready to take off...... If it goes as projected I'm going to be a very WEALTHY WOMAN! I'm being skeptical though and just hoping for enough of a residual income for retirement investment. However, the other monies coming from this should be quite lucrative and only part-time work too which is exciting. I need to streamline my business because my PhD studies are really needing more attention. Technically, graduate students in the sciences shouldn't even be working!! :eek
C
C3RVETTE
Guest
Sounds great! What do I need to do to get in on this?
- Thread starter
- #68
chevyaddict
Well-known member
Boy, everybody is asking that question! That has been part of the delay aside from also securing the patents before it goes to market. The cool thing is it is software, so the cost of goods sold is like nill..... hee hee hee.C3RVETTE said:Sounds great! What do I need to do to get in on this?
C
C3RVETTE
Guest
Thats cool.But I think when you're rich & retired,you'll still be the one turning the wrenches on your Chevys,not your "staff"...am I right?chevyaddict said:Boy, everybody is asking that question! That has been part of the delay aside from also securing the patents before it goes to market. The cool thing is it is software, so the cost of goods sold is like nill..... hee hee hee.
:cool Hey,fly up here to Washington State,& I'll give you a tour of the San Juan Islands!(I live on Fidalgo Island)
- Thread starter
- #70
chevyaddict
Well-known member
THAT'S RIGHT! I'll be turning wrenches until I'm 90! I'm a pretty down to earth person all the way around. Don't think much would change if I was to strike it rich. I'll certainly look you up if I'm in the area! That would be a blast!
Of course, this presumes that I would have some free time for..... what's that called again?...... ummm....... Oh yea, a social life!
Of course, this presumes that I would have some free time for..... what's that called again?...... ummm....... Oh yea, a social life!
C
C3RVETTE
Guest
Yeah,I havent taken much time out for that either..:eyerolechevyaddict said:THAT'S RIGHT! I'll be turning wrenches until I'm 90! I'm a pretty down to earth person all the way around. Don't think much would change if I was to strike it rich. I'll certainly look you up if I'm in the area! That would be a blast!
Of course, this presumes that I would have some free time for..... what's that called again?...... ummm....... Oh yea, a social life!
wishuwerehere82
Well-known member
- Joined
- Sep 6, 2003
- Messages
- 2,316
- Location
- Rochester, NY
- Corvette
- Red '82 Coupe,Sebring Silver '98 Coupe
All work and no play make Dawn a dull girl. Shurely you know the psycholological effects that can have.
I can't imagine that.
3 Corvettes, dull....hardly! More money, more Corvettes,and someday you will have a cabana boy to serve you your wrenches!:L
Pete.
I can't imagine that.
3 Corvettes, dull....hardly! More money, more Corvettes,and someday you will have a cabana boy to serve you your wrenches!:L
Pete.
- Thread starter
- #73
chevyaddict
Well-known member
wishuwerehere82 said:All work and no play make Dawn a dull girl. Shurely you know the psycholological effects that can have.
I can't imagine that.
3 Corvettes, dull....hardly! More money, more Corvettes,and someday you will have a cabana boy to serve you your wrenches!:L
Pete.
Ooooo.... never thought if it THAT WAY! :L
wishuwerehere82
Well-known member
- Joined
- Sep 6, 2003
- Messages
- 2,316
- Location
- Rochester, NY
- Corvette
- Red '82 Coupe,Sebring Silver '98 Coupe
Think about it.chevyaddict said:
- Thread starter
- #75
chevyaddict
Well-known member
:t hee hee heewishuwerehere82 said:Think about it.
C
C3RVETTE
Guest
Wow! II think I see some skin! Hey,who took that pic?
I was looking at your list of vehicles Dawn,& I can understand the Ninja-I had one_but,a Fiat!:duh 
:L Probly good on gas,though.
II think I see some skin! Hey,who took that pic? I was looking at your list of vehicles Dawn,& I can understand the Ninja-I had one_but,a Fiat!:duh :L Probly good on gas,though.- Thread starter
- #77
chevyaddict
Well-known member
I've had that little fiat for a long time! Its so cute. I modified it quite a bit. Did away with the bumpers, put a chrome roll bar in it and spoked wheels. Looks pretty cool! However, the carb is toast and I can't get it to pass emissions anymore. They don't make carbs for it so some day I'm going to build a custom frame, widen the whole body and slam a small block in it!
C
C3RVETTE
Guest
Yeah,I suppose their stock frames are pretty thin,huh? I always wanted a Triumph TR6,or an MG years ago,but I could never fit in one.I'm 6'3" and size 13's so theres no way.Shoot,if I was an inch taller I probly wouldnt have a Vette,eitherchevyaddict said:I've had that little fiat for a long time! Its so cute. I modified it quite a bit. Did away with the bumpers, put a chrome roll bar in it and spoked wheels. Looks pretty cool! However, the carb is toast and I can't get it to pass emissions anymore. They don't make carbs for it so some day I'm going to build a custom frame, widen the whole body and slam a small block in it!
wishuwerehere82
Well-known member
- Joined
- Sep 6, 2003
- Messages
- 2,316
- Location
- Rochester, NY
- Corvette
- Red '82 Coupe,Sebring Silver '98 Coupe
I had a buddy that put a 327 in an MGB in shop class. It didn't leave much room for seats, but it sure moved!:cool
I also have a Kawasaki. GPZ 1100, 129HP and 45MPG. I love it, but it's too long for me and makes my wrists hurt after 20 minutes.
I'm enjoying my new C5 now,and there's no time for the other toys.
Love your new avatar! Keep them coming.
I also have a Kawasaki. GPZ 1100, 129HP and 45MPG. I love it, but it's too long for me and makes my wrists hurt after 20 minutes.
I'm enjoying my new C5 now,and there's no time for the other toys.
Love your new avatar! Keep them coming.
C
C3RVETTE
Guest
Hey,Pete,I'll take the 1100!wishuwerehere82 said:
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
