Search results

Hey crebo, what kind of mileage can you get with your big block car?

I have a daytona style hood on my car, my thinking was to have the vents in the hood to get rid of some hot air from under the hood. When I did my turbo setup I could have hooked back up to the original exhaust pipes under the car but I went with sidepipes instead to see how much difference it...

Check this product out http://www.coollizard.com/ I saw this at the SEMA show last year in Vegas, the guy had a coat of his heat barrier product on a griddle and had it turned up to 300 degrees and just a .040 thick layer of it kept ice cubes from melting any faster that the ones sitting on...

Lambo door kits I was at the SEMA show last nov and there were a half a dozen lambo door kit manufacturers on display. There was one mfg there that had the best looking setup and now I cant remember their name. If anybody was there that might remember it, I would appreciate the info on them...

Subscribing... I would like to know if it makes it any easier to get in and out of the car?

Yup what akray4play said. I had a small block serp setup from a 94 pickup on my small block and it fit fine so I got the big block brackets but no such luck. I had an L-88 hood on mine. I did mine before I started messing with e bay, didnt think to look there. I was in a hurry to get mine on the...

I used a pair of 96 vette seats in my 72, They sit up a tad higher than the originals but I am short so no problem there. The drivers side seat was power but I didnt use it, I just bolted the 72 tracks to the 96 seats and bolted them in. I like em! MIke

I tried using the truck setup on my big block but it stuck up too high to fit under the hood. I ended up using a street and performance serp setup on mine, it wasnt much more than buying the correct brackets and pulleys and it was new and shiny. ;) Mike

I am redoing the exhaust to fit under my newly aquired fiberglass sidepipe covers, then I gotta rework the hood to get it to clear the carb hat, I am using a daytona style hood and am going to cut the raised center section and lift it from zero on the front to about 1 inch where the carb sits...

I didnt take very many pics of it till I was pretty much finished with it. On the drivers side I had to remove the vacuum tank to make room for the turbo, on the passengers side I had to take all the stock heater and a/c system out for that turbo to fit. I am going to use a vintage air system...

I finally got to drive my twin turbo project I have been working on every spare second since last november and its great!! I still have some carb tuning to do but it runs pretty good so far. I got it running and cruised around some to check out the fuel system, cooling system, ignition ect...

Looks good, do you have any pics of your dash setup? Mike

My turbos are Rajays and are good for about 400 hp per turbo. I bought stainless to use for the exhaust but decided to try it first with mild steel to make sure it worked out ok. I used block hugger headers and have a 3 inch pipe that comes off the collector and runs down under the frame and...

rajay I am using a pair of rajays on my twin turbo project. Mine are 3AA1EE80B1

Jack, I have a 72 coupe that I took all the factory heat/aircond parts out of, I am going to use a vintage air setup. If you end up making the deal maybe we could swap a few parts. If possible I would like to have the non a/c vent system in my car in addition to the vintage air setup, I live in...

Pics A few more

oops Ok here it is

Pics... Ok hope these will work

HI, I am building a twin turbo setup on my 72 big block and I wondered if someone could tell me how far out from the body the sidepipe covers measure? I am running 3 inch sidepipes off the turbos and I am hoping I could buy the fiberglass factory looking covers to use over them. The measurement...

How big of a pipe will fit behind the fiberglass covers anyway?