Search results

Yes they are

$175.00 + shipping in the box 8 hole rack

Live with it thats the way it was. New bulbs won't matter

Back in the day I had to take my big block 69 Nova SS in for a recall on the motor mounts. The fix was a cable wrapped around the exhaust manifold and the frame on the drivers side. Boy I wish I still had that car.

Check your PM

I seem to remember a Brn wire going to the blower switch. It was feed off the main IP harness

I have 2 $150.00 plus shipping. They are driver condition. one glass is loose on the bottom channel easy fix. Good for conversion 73-77. I have 1 storage tray fiberglass don't know what year very nice shape. Missing hinges for the bulk head $175.00 plus shipping

I got banned forever. No big loss really, those mods have some really swelled up heads over there.

Going to need some specialized tools for this job. I use my 50 ton press to drive the spindle out. They sell a spindle knocker that you use a hammer on to drive out the spindle. There is another tool that is used it bolts to the caliper mount and the shock bolt they have been known to crack or...

Four Seasons P/N 38621 Found this also Orifice Tube Color Chart

Anyone know what the part # for this blue orfice tube? Or year and model it was used in?

Me personally I would not drive it.

This will only get worse it will start to effect the door opening and closing " door sag." as the hinge pillar is was welded to the rocker channel. I have done my 73 but would never do another. If you are capable of going the work yourself you can save some money. If you can't have a fat check...

You should only need the triangular support that bolts to the front of the crossmember. Give Contempory Corvettes in Bristol Pa. a call. They will know what you need.

It was either operator error or, a job was pulled out of sequence. The operator may have not been notified. The supervisors fault. Last it should have been picked up by the inspector. This happened quite a bit back in the day. Most of the time it was held up in the paint dept,for paint repair.A...

The prefered 2004r trans would be from the Buick G/N or the Monte SS. Because of the valve body and govenor. You can get the 2004r form any of these vehicles. THM 200-4R Information Go to www.turbobuick.com These guys know the 2004r

I agree

The car is only original once. The matching numbers is out the window as the original motor has been replaced. Finding a correct block, heads,intake and exhaust manifolds, with correct casting numbers and date codes, will be an effort in itself. Still the vin won't match the serial number. I...

This system is off a 90 S series 4.3 pickup/Blazer. Only down side is it sits high. I used an aftermaket L88 hood. Plenty of clearence.

You can check here Engine Heaters at PartsAmerica.com