Welcome to the Corvette Forums at the Corvette Action Center!

Recent content by Artsvette73

  1. Artsvette73

    Question: Roof Panel Carrier

    $175.00 + shipping in the box 8 hole rack
  2. Artsvette73

    73 Corvette very dim dash lights, how to make brighter?

    Live with it thats the way it was. New bulbs won't matter
  3. Artsvette73

    Question: Motor mount question.

    Back in the day I had to take my big block 69 Nova SS in for a recall on the motor mounts. The fix was a cable wrapped around the exhaust manifold and the frame on the drivers side. Boy I wish I still had that car.
  4. Artsvette73

    wtb 3.08 posi centersection

    Check your PM
  5. Artsvette73

    Help! wiring under a/c controls.

    I seem to remember a Brn wire going to the blower switch. It was feed off the main IP harness
  6. Artsvette73

    68-72 Removeable Rear Glass and storage tray

    I have 2 $150.00 plus shipping. They are driver condition. one glass is loose on the bottom channel easy fix. Good for conversion 73-77. I have 1 storage tray fiberglass don't know what year very nice shape. Missing hinges for the bulk head $175.00 plus shipping
  7. Artsvette73

    I wonder how many new members will show up here

    I got banned forever. No big loss really, those mods have some really swelled up heads over there.
  8. Artsvette73

    Question: Trailing arm rebuild

    Going to need some specialized tools for this job. I use my 50 ton press to drive the spindle out. They sell a spindle knocker that you use a hammer on to drive out the spindle. There is another tool that is used it bolts to the caliper mount and the shock bolt they have been known to crack or...
  9. Artsvette73

    Need A/C help in Florida

    Four Seasons P/N 38621 Found this also Orifice Tube Color Chart
  10. Artsvette73

    Need A/C help in Florida

    Anyone know what the part # for this blue orfice tube? Or year and model it was used in?
  11. Artsvette73

    Dif Cover Tabs

    Me personally I would not drive it.
  12. Artsvette73

    Help! Keep or Unload?!?!?!

    This will only get worse it will start to effect the door opening and closing " door sag." as the hinge pillar is was welded to the rocker channel. I have done my 73 but would never do another. If you are capable of going the work yourself you can save some money. If you can't have a fat check...
  13. Artsvette73

    Help! 77 Crossmember

    You should only need the triangular support that bolts to the front of the crossmember. Give Contempory Corvettes in Bristol Pa. a call. They will know what you need.
  14. Artsvette73

    1979 VIN and Engine # off by one number?

    It was either operator error or, a job was pulled out of sequence. The operator may have not been notified. The supervisors fault. Last it should have been picked up by the inspector. This happened quite a bit back in the day. Most of the time it was held up in the paint dept,for paint repair.A...
Back
Top Bottom