Part I
August 12, 09
A sale from VBP does no good.
Selling defective parts and with a substandard customer service I would never buy their products and would not recommend their business ever.
I bought my parts on "sale" and the savings do not match to the discomfort I've received from VBP...
Months ago I ordered four rotors for my 96 Vette from Vette Brakes and Products. The sports suspension system, a complete bushing set (frot & rear) and the C5 Brake Kit Upgrade for late C4s.
10 components came out defective. Two-Front caliper brackets, two-front rotors, two-rear rotors and...
Gents, yesterday I visited my girlfriend at her work and there, on the parking lot was a 96 Collectors Edition Coupe! I got closer and...
1. Needs lots of TLC
2. Non-F45 Likely to be a Z51
3. I noticed the 6 Sp, so it is a LT4
4. Interiors are BAD. Needs new carpets all around
5. Doesn't even...
I was disassembling the master cylinder's rear spring bias and once I released the O ring all parts popped out. Attached is two pictures A & B. Can anyone tell me which way these parts go back in?
Thanks
A:
B:
I posted this on the Cf and DC.
I installed new shorty headers, new O2 sensors, new MSD Pro-Billet Optic Distributor, new MSD Blaster Coil, new MSD wires and new OEM AC plugs.
The Vette started right away and lasted 2 seconds, tried again, lasted 2-3 seconds, again, 3 seconds. I tried a...
I washed the engine just like I have done before. The engine started normal and I took off to do a lap around the block, got on the steet and then.... tranny would not shift to 2nd and the engine now stays at 1,500 RPMS. The "SERVICE ASR" light came up, I restarted the engine and never came back...
I purchase slotted/drilled rotors a while back and they improved my braking. My question is how are they supposed to be installed? Why Am I asking because I have seen on TV, on the street and magazines installed both ways. With the slotted pointing forward and backward.
This is the way I...
I just installed new ACCEL injectors and the car is shaking a little and white smoke is comming out the right muffler. I swap them back with the stock and the shaking went away but then lots of white smoke was coming out. I took it out, I was mad so I rev it up to few 5600 RPMs and the smoke...
I replaced the AC Delco coil with a MSD and ever since I do not have a "smooth" start. Are these aftermarket coils any better than AC Delco or factory?
:D I know this one has been around here...I looked in the search engine and I read some angry comments and this is what I need.
Need to know the correct fuel pressure for a 95 CORVETTE automatic using an adjustable pressure regulator. Please specify if the vacumm line should be off or on.
My head is playing tricks on me. Weekly I wonder how it would feel to install a LT4 Conversion Kit in my Corvette.
Have anyone done this to their LT1. This may be a project to be accomplished for next birthday. I'd say I'll need extra new parts like timing belt, injectors etc. If anyone...
I installed the Vortex Ram Air yesterday. I love :mad the way the vendors take pictures and show how easy installation will be. It shows that it may takes 25 minutes to do, it took me over four hours to get it done. I went to hell and back by just removing the radiator shrub. "Love those three...
While watching POWERBLOCK TV in the Spike Channel, they installed a LS1 crate engine in a 4X4 frame jeep called "The Spider"
My question has nothing to do with gear heads but is...
Who has installed a LS1 or LS2 crate engine in a C4? Is it possible? I have seen a '82 with a LT1.
If I remove the exhaust's resonator (muffler under the car), what do i expect?
More noise?
Vibrations?
Can I install a "crossover or X pipe", what it would do for the car:lou
I have a Belltronics RX65. Where is the best place to mount the detector? I'm asking because I'm thinking on buying a direct cable to eliminate the cigarette 12V volt plug.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.